Brief introduction of Alumina ceamic
Alumina or aluminum oxide (Al2O3) in its various levels of purity is used more often than any other advanced ceramic material. CeramTec offers a wide range of material types with different property profiles that can be adjusted via a targeted matrix design.
For Alumina components, we can control tight tolerance. The surface can be polised very well according to customers' requirement. And we accept various designs.
Features of Alumina water valve
1.Hardness:≥90
2.Temper of rupture(Mpa): ≥3.75
3.Bending strength(Mpa): ≥275
4.Bulk density(g/cm³): ≥3.65
5.Tear-and wear allowance: ≤0.2
95% Alumina Ceramic |
Essential components | Al2O3 |
Material characteristics | Density | g/cm³ | 3.6 |
Water absorption | % | 0 |
Agglomeration temperature | °C | 1680 |
Physical characteristics | Hardness | HV | 1500 |
Anti-Folding Strength | Kgf/cm2 | 3000 |
Compressive Strength | Kgf/cm2 | 25000 |
Tenacity | Map.m3/2 | 3-4 |
Thermodynamic property | Highest application temperatrure | °C | 1450 |
Thermal expansion coefficient 0-1000°C | /°C | 8*10-6 |
Heat resistance | T(°C) | 220 |
Thermal conductivity | W/m.k(25-300°C) | 25 14 |
Properties of Alumina ceramic
1. very good electrical insulation
2. moderate to extremely mechanical strength
3. high hardness
4. moderate thermal conductivity
5. good gliding properties
6. low density
7. high corrosion and wear resistance
8. operating temperatuire without mechanical load 1000- 1500 degree
9. very high compressive strength
10. Bio-inert and food compatible
As a manufacturer of technical ceramic products, Innovacera main business is produce metallization ceramics and ceramics components as customer request.
Innovacera offer you a wide range of production facilities like extrusion, injection moulding, pressing and casting. Depending on product geometry and quantities, we will choose the suitable technique for your products.
Innovacera products widely used in Aerospace, Research, Food Processing, Fluid Handling, Scientific, Automotive, Defense, Thermal Processing, Electrical, Process Control, Textile & Wire, Pulp & Paper, Mechanical, Glass Processing, Mineral Processing as well as smaller niche markets.
Our goal is to put the often extreme properties of technical ceramics to the best use.