XZ45X signal resilient seated gate valve DN40-DN600 with competitive prices
1. Overview
Signal gate valve is often used in automatic sprinkler fire piping system to monitor the water supply piping, and can be remote indication of valve opening. Rising Stem Gate Valve and attached to the opening direction gate valve are often used in fire protection system, liters rod gate valve gate valve installation position from the ground is higher, generally, it is clear indication of valve opening, if the installation location is more low. Gate valve need to be attached to open instructions.
2. Main features
？ flat style seat
？ The overall package glue
？ corrosion-resistant
？ difficult to fragmentation
？ three "O" ring seal
？ The casting body
？ help to drink
？ Lightweight
3. Advantage
1. We can promise the quality;
2. If you want, you can have your own logo on the product;
3. We offer the non-standard valve, according to customer requirments;
4. Export to maninly market: Russia/Ukraine/Belarus/Uzbekistan/Tajikistan/St. Peterburg /The European market and other countries.
4. Design parameters
Nominal pressure: 1.0 ~ 2.5MPa
Nominal pass through: 50 ~~ 400mm
Operating temperature: 0 ~ 80 ° C
Applicable medium: Water, oil, gas and other
Flange Standard: GB / T 17241.6 GB9113
Test standard: GB13927 AP1598
|
Serial no. |
part |
material |
|
1 |
Body |
Ductile iron, Cast iron |
|
2 |
Wedge Disc |
Ductile cast iron packed with rubber or EDPM outside |
|
3 |
Bolt |
Carbonized treatment |
|
4 |
Gasket |
NBR or EPDM |
|
5 |
Cover |
Ductile iron, Cast iron |
|
6 |
Stem |
Stainless steel |
|
7 |
O-ring /O-type sealing ring |
Ductile iron, Cast iron |
|
8 |
Thrust bearing |
Copper |
|
9 |
Bolt |
Stainless steel |
|
10 |
Gland |
2Cr13 |
|
11 |
Dust proof gasket |
Buna-N rubber NBR |
|
12 |
Hand wheel (or Transmission cap ) |
Cast iron |
Hebei Mingda International Trading Company is a trading company which is specialized in
Castings, forgings and machinery parts.
We have deep business interaction with manufactures in major cities of China, so we are quite
Flexible and confident to be any kind of casting products to be able to meet
Ourcustomers'request on quanlity and delivery time.
Our products include all kinds of raw castings to be made of ductile iron, grey iron, brass,
Stainless steel and aluminums, machined castings and forged parts. To make these parts
According to the customers' drawings, we have relative suitable production craft and
Equipments, such as resin sand, sand mould, hot core boxes, lost-wax, lost -foam and so on.
Specially for hydrant bodies and valves' bodies, we have collected rich experience for these
Products in the past 16 year's actual production, Now we are proud of our products with good
Surface and high quality material. Whatever, we have been trying our best to provide our
Customers with better quality castings by improving production crafts and more careful quality
Control.
Apart from buyers' requirements, we also have our own very strict quality assurance system,
That makes sure the buyer's demand more significant and it could be done exactly according to
Our customres'required Quality Standards. This saves much time and money for both sides.
From founded to now, our products arehighly recognized by our customers, Meantime we win a
Good reputation in the casting and machinery industry whoever from customers or our partners.
Now our products are mainly exporting to Germany, Sweden, UK, Denmark, France, USA,
Middle-East, and so on.
Looking Forward To Receiving Your Kind Favorable Reply At Your Earliest!
