Conform to API 602, and ANSI B16.34.
Each are tested according to API 598, and marking is per MSS SP-25
Construction is as follows:
Globe Valve, Forge steel
Full Port and Conventional Port
Face to face according t ANSI B16.10
Flanges according to ANSI B16.5
Pressure seal bonnet
Outside Yoke (OS & Y)
Two piecScrew ande self-aligning packing gland
Integral backseat
Integral body flanges
Butt Welded Ends to ASME B16.25
RTJ bonnet gasket ring joint type
Seal welded bonnet or threaded and pressure seal bonnet
Bewell Industrial Co., Ltd is working many years in close collaboration with our customers, developing products that meet their current and future requirments.Bewell offers customers timely, cost-effective products and services than enhance performance while driving down operating cost.Our friendly&professional staff can offer customers the benefit of theirvast experience gained over many years in this industry.
The quality policy of bewell is based upon the commitment to provide its customers with the best available products and services 100% of the time.
Bewell's products are:
Main Products:
1)Industrial Valve:Gate Valve, Globe valve, ball valve, check valve, plug valve, butterfly valve
The size is from DN15 to DN1500 (1/2" to 48")
The pressure is from PN10 to PN400, CL150 to CL3000
The material is CARBON STEEL/STAINLESS STEEL/ALLOY STEEL/DUPLEX STEEL etc.
Other products
2)Stainless steel pipe:ASTM A554 / A269 / A312/ A213 etc seamless and welded
The size is from OD:6mm to 630 mm, WT:0.5mm to 30 mm
The material:TP201, TP304, TP304L, TP310, TP316, TP316L, TP321, TP347 etc
3)Pipe fitting:Elbow, Cross, Tee, Cap, Reducer
The size is:Butt welding fitting 1/2"-48"(DN15-DN1500) SCH5S-SCH160
Forge fitting:1/8"-4"(DN6-DN100) SCH80-SCH160
The material is:Carbon steel, Stainless steel, Duplex steel etc.
4) Flange:WN, Slip On, BW, SW etc
The size is:1/2"-48"(DN15-DN1200) 150LBS-2500LB(PN10-PN400)
The material is:Carbon steel, Stainless steel, duplex steel
