Valve Manufacturers and Factories

Home Valve Products High Chrome Cr27 Open Impeller

High Chrome Cr27 Open Impeller

High Chrome Cr27 Open Impeller
Price: US $ 55/Piece
Trade Terms: FOB,CFR,CIF
Min Order: 1/Piece
Pay Type: L/C,T/T,Paypal,Money Gram,Western Union

Slurry pump spares 
 
Shijiazhuang Naipu Pump Co.,ltd is a slurry pump manufacturer of above 20 years' experience,design,development ,production,sales and services inosculate as a whole.The company manufactures its products using advanced technique based on well built management and sales & service system.Our slurry pumps are manufacturered to be the best standards,ensuring longer service life.Higher performance,ease of operation and maintenance.The pumps are widely used in mining,construction,metallurgy,power plants,sewage water treatment,dredging,chemical and petroleum industries.
 
Centrifugal slurry pumps are mainly used to pump high-hardness,strong corrosion and high concentration liquids that contain suspended solid particles,such as finished ores,refuse ores,ahes,cinders,cements,mud,mineral stones etc
 
We proudly manufacture quality pumps whose parts are 100% interchangeable with major brands. This means no more inventory hassles when you decide to use another pump supplier.


Shijiazhuang Naipu Pump Co.,Ltd
Pump  typePerformanceMain ApplicationFeature
ZJ(R)Slurry PumpCapacity:0-5300 m3/h
Head:0-70m
Discharge:1-18 Inch
Power: Motor/Diesel
Material: High Chrome alloy or Nature Rubber
DriveType: ZVZ/CRZ/CV/DC
Liquid temperature up to 90°C
 
 
Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling
Sand And Gravel Handling
1.Type ZJ(R) slurry pumps are cantilevered,horizontal,centrifugal pumps
2.Fully Interchange with world Famous Brand
3. Made Anti wear and Anti-corrosive Material
4. Can installed in multistage series
 
ZJM Medium Duty Slurry PumpCapacity:540-1228 m3/h
Head:15-61m
Discharge:8 Inch
Power: Motor/Diesel
Material: High Chrome alloy or Nature Rubber
Drive Type: ZVZ/CRZ/CV/DC
Liquid temperature up to 90°C
 
Dense media transfer
Dense media make-up
Bottom boiler and fly ash
Ferrosilicon make up
Thickener underflow
Dewatering
1. slurry pumps and spare parts could fully interchange with world famous brand.
2. Can installed in multistage series
3. designed for continuous pumping of highly abrasive and corrosive slurries.
ZJ(H)High Head Slurry PumpCapacity:16.2-1008 m3/h
Head:25-118m
Discharge:1-6Inch
Power: Motor/Diesel
Material: High Chrome alloy 
Drive Type: ZVZ/CRZ/CV/DC
Liquid temperature up to 90°C
 
 
 
Tailings Delivery
Cyclone Feed
Diamond Concentrate
Slag Granulation
Bottom Boiler and Fly Ash
Mill Discharge
4. Designed to produce high heads per stage at high Pressures.
5. Capable of handing medium size particles and pumping at heads in excess of 90m per stage
6. Adoptable of gland seal or expeller Seal
7. Can installed in multistage series
ZJD Low-Abrasive Slurry PumpCapacity:2.34-7920 m3/h
Head:6-50m
Discharge:20-550mm
Power: Motor/Diesel
Material: High Chrome/ Rubber
Drive Type: ZVZ/CRZ/CV/DC
 
Chemical Process
Heavy Minerals
Plant Water Supply
Thickener Overflow
Paper and Pulp
Slag Granulation
1. Attractive initial cost.
2. High speed Operation
3. Small Volumes saving floor Area
4. Gland Seal And Centrifugal Seal
ZJS(H) Gravel PumpCapacity:36-2232m3/h
Head:6-77m
Discharge:4-14inch
Power: Motor/Diesel
Material: High Chrome/NI-Hard
Drive Type: ZVZ/CRZ/CV/DC
 
Slag Granulation
Suction Hopper Dredging
Dredging
Barge Loading
Sand Reclamation
Sugar Beet
1.Single Casing, Wide Wet Passage
2.designed for continuous pumping of extremely aggressive slurries
3.Easy Installation and operation, 
4.Good performance of NPSH And Abrasion-resistance
5.Type ZJSH Pump are of high head ones
ZJG Slurry PumpCapacity:15.8-342.3L/S
Head:20-100M m
Discharge:65-300mm
Power: Motor/Diesel
Material: High Chrome/NI-Hard
Drive Type: CRZ
Max Pressure: 3.6Mpa
Handling The Mixture Abrasive Solids
Electric Power
Metallurgy
Mine Coal
Constructional Material
Chemical Industry
1.CAD modern design,super hydraulic performance,high efficiency and lower abrasion rate
2.Wide passage, non-clogging and good performance of NPSH;
3. Free of leakage;
4.Reliability design 
5.Can be Installed Multistage 
ZG Slurry PumpCapacity: 90-2400m3/h
Head:6-135mm
Discharge:40-300mm
Power: Motor/Diesel
Material: High Chrome
Drive Type: CRZ/DCZ/ZVZ/CV
 
Electric Power
Constructional Material
Mine Coal
Coal washing
Sand Reclamation
Sugar Beet
1.Used international advanced solid-liquid two-phase flow theory
2.Lower noise and vibration
3.Long service life
4.concentration of weight: 45%(ash)
                      60%()
 
WS Dredging PumpCapacity: 180-25000m3/h
Head:25-76mm
Discharge:100-1000mm
Power: Motor/Diesel
Material: High Chrome
Drive Type:  DCZ 
 
Suction Hopper Dredging
Constructional Material
Sand gravel processing
Barge Loading
Sand Reclamation
Dredging and damming of the river and sea
1.Light weight,good wear-resistant,
Super dredging performance 
2. Suited for the dredge on the whole construction ,high multiple economy benefits and so on .
3. It throughout meets requirements of the dredge to dredging pumps 
ZJW Feeding pumpsCapacity: 30-305m3/h
Head:43.5-91.8mm
Discharge:50-125mm
Power: Motor
Material: High Chrome
Drive Type:  DC
 
coal washery,
environmental protection,
aluminum factory,
smelting plant etc.
 
 
1.ZJW series filter press feeding pump accept unique hydraulic design and installation mode of the impeller
2.Use in the filter press feed 
3. large capacity, low pressure feeding 
and low capacity,high pressure filter.
 
ZJL(R) Vertical Slurry PumpCapacity: 5.4-247.5L/S
Head:4.5-37m
Discharge:40-200mm
Power: Motor
Material: High Chrome/Rubber
Drive Type:  DC/BD
 
Sump drainage washdown
Floor drainage
Mill sumps
Carbon transfer
Monitoring
Magnetite mixing
1.Vertical, centrifugal slurry pumps submerged in sump to work.
2.No need of any shaft seal and sealing water.
3.Can also be operated normally for insufficient suction duties
ZJQ submersible Slurry pump Capacity: 25-2000M3/H
Head:12-60m
Discharge:80-400mm
Power: Motor
Material: Hard Metal
 
Delivering Liquid Sand, 
Coal Cinder Solid
Clearing The Mud In Lake, River, Sea
Dredging Widening Channel
1.The pump adopts excellent material, advanced structure, and it is with wide flowing passage & strong delivery ability.
2.The hydraulic parts are wear-resistant. 
ZJF froth PumpCapacity: 7.2-330 M3/H
Head:5-30m
Discharge:50-150mm
Power: Motor
Material:High Chrome/rubber
 
Minerals Flotation Processing
Handle Frothy Slurries
1.Designed for continuous pumping of highly abrasive and corrosive frothy slurries
2.They have a vertical shaft configuration, and comprise a hopper, with vertical Bearing Assembly,
Prod Model: OEM
Markets: North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Material: High Chrome Alloy or Rubber
Stock: Large
Mqq: 1 Pic Slurry Pump Impeller
Delivety: Within 5days After Get The Payment
Manufacturer Or Trader: Slurry Pump Impeller Factory
After-Sales Service: Perfect
Certificate: ISO 9001:2008, CE, SGS
Color: as Customer's Request
OEM: Accept
Casting Method: Sand Casting
Casting Form Material: Sand
Casting Metal: Cast Iron
Casting Form Usage Count: Permanent
Shijiazhuang Naipu Pump Co., Ltd is a professional manufacturing enterprise of slurry pumps located in high and new technology development zone. The enterprise has one group of high quality technical and management talent working in Design, R & D, Production, Sales and Services. The technical team consists of talents specialized in hydraulic machinery, casting, heat treatment, engineering, material science and machining.

The company manufactures its products using advanced technique based on well built management and sales & service system. Product quality is guaranteed with various test and inspection facilities...

Naipu is specialized in the manufacture and sales of slurry pump and pump parts, especially the design and manufacture of products made with high abrasive, anti corrosive rubber material, including NP-AH(R). NP-M. NP-HH. NP-SP(R). NP-G series slurry pump, NP-ZG. NP-ZJG series slurry pump, NP-WS series dredging pump and NP-PNJ series slurry pump.

The products are widely used in mining, power, metallurgy, coal, dreading, building material and other Industrial lines to pump concentrate, tailings, sludge and other abrasive, high density slurries.

Meeting customers' technical requirements and with a long lifespan, lower cost and high safety, our products are sold well all over of China and far to southeast Asia, Noth America, South America, Russia and etc.

We are confident that we can offer customers satisfying products and services with our continuous efforts in product research and improvement. We look forward to working with customers domestic and abroad to build a promising future.

We can develop and produce a range of pumps according to different media situation to meet different duty requirment.

There are rubber material (R08, R12, R26, R33, R38, R55, S03, S12, S31, S21, S51, S52 U01 and etc), wear resistant metal material( A05, A07, A33, A49, A61 and etc), Corrosion Resistant stainless steel material (201, 304, 316, 316lL and etc ), fully meet customers' request.

We can undertake various OEM orders for pumps as well as spare parts customized according to drawings or samples.

Send your message to this manufacturer

  • Shijiazhuang Naipu Pump Co., Ltd.

More >

Other Valve Products with This Manufacturers

About Us Valve Products Valve Manufacturers Hot Valve Valve News Valve Trade Shows Site Partners Contact Us Sitemap