Brief Information Of Fire Hydrant
Hydrants, officially called for hydrant A fixed fire-fighting facilities, the main role is to control the fuel, combustion isolated matter, eliminate ignition sources. Indoor and outdoor fire hydrant hydrant points. Fire control system includes an outdoor fire hydrant system, fire hydrant system, fire extinguisher system, and some will have automatic sprinkler systems, water cannon system, gas extinguishing systems, fire detection systems, water mist systems. Primarily for fire hydrant from the municipal water supply network or outdoor fire extinguishing water supply network to implement water can also be directly connected with water, water gun fire. Therefore, indoor and outdoor fire hydrant fire fighting system is one of the important fire-fighting facilities.
How To Use
1. Open the underground water hydrant wrench pocket connection with the switch.
2, the fire hose to connect.
3. Use a wrench to open the underground fire hydrant water valve switch.
4, connecting hose inlet and outlet tips.
5, at least two or more persons holding the spray tip, Xianghuo source water until the fire is out put out so far.
Technical Parameters
The indoor fire hydrant can be install in plant, warehouse, high building, public place, ship.
We make different styles of indoor hydrant
1. Item: SNJ 65
2. Type:SN50,SN65
3. Strength test pressure:2.4mpa
4. The indoor fire hydrant is a fixed indoor fire-fighting equipment in factories, public buildings, warehouse,etc.
Indoor fire hydrant is the connecter in the water piping network, including one valve with single outlet, One Valve with double outlet and double valve with double outlet etc. It's used to offer assistance to control the fire.
Rated working pressure:16 Bar
Strength test pressure:24Bar
A hose is attached to the fire hydrant, then the valve is opened to provide a powerful flow of water, on the order of 350 kPa (50 lbf/in²) (this pressure varies according to region and depends on various factors including the size and location of the attached water main). This hose can be further attached to a fire engine, which can then use a powerful pump to boost the water pressure and possibly split it into multiple streams. The hose may be connected with a threaded connection, instantaneous "quick" connector or a Storz connector. Care should be taken not to open or close a fire hydrant too quickly, as this can create a water hammer which can damage nearby pipes and equipment. The water inside a charged hoseline causes it to be very heavy and high water pressure causes it to be stiff and unable to make a tight turn while pressurized.
size: 1.5", 2.5"
Suzhou Seapeak Co., Ltd., is a leading manufacturer and exporter of fire hose, PVC hose, coupling and other fire-fighting equipments in mainland China.
Our main products:Rubber lining fire hose, EPDM lining fire hose, TPE lining fire hose, PU lining fire hose, colorful fire hose, rubber covered fire hose, single jacket fire hose and double jacket fire hose.
Our hose is for marine, mill, forest, fire-fighting, mine and construction.
Meanwhile, we have a good cooperation with other famous international company in fire-fighting field.In 1999, we have approved ISO9000 certificate.We are also a member of FPA, CFPA.
You may be assured that we will supply you high quality and low cost products.In case you need more information on corporation and our products, please do not hesitate to contact us and we shall be very pleased to reply any of your inquires at any time.
