Product Description:
Connection dimension of flange:
PN1.0MPa, PN1.6MPa to GB4216
PN2.5MPa to GB9113
Purpose:
For the water supply pipeline of the water tower in the mining industry and domestic water to control the water line and perent the overfall.
Suitable temperature: ≤ 80º C
Advantages:
. Reliably close. The soft and hard double-sealing valve plate is used to seal it. The closing force of the valve plate increases and reduces according to increase and reduction of the
Water pressure by the hydraulic control principle. The sealing reliability is high.
. Large flow. Adopt the designs of half line sprue runner, wide valve body and same water section. The resistance of the valve is small.
. Safely run. Can adjust the speed of closing. The valve stably works. The pressure fluctuation can't be caused for opening and closing. There isn't the pipe oscillation and noise.
. Be easy to use and care. The main valve body can be in stalled out of the pool. It is convenient to debug, examine and repair and easy to care.
Pressure rating: PN (MPa)
1.0 1.6 2.5
Tests:
Test JB/T9092, GB/T13927
Nominal pressure: PN(MPa)
Body: PN x1.5
Seal: PN x 1.1
Materials:
Body: Cast iron, ductile iron, carbon steel
Bonnet: Cast iron, ductile iron, carbon steel
Compression spring: Silicon manganese steel
Cylinder liner: Stainless steel
Diaphragm clamping: Ductile iron
Plate
Diaphragm seat: Cast iron, ductile iron, carbon steel
Piston: Ductile iron, bronze
Diaphragm: NBR rubber
O-ring: NBR rubber
Stem: Stainless steel
Disc: Ductile iron, bronze
Gasket: NBR rubber
Gasket: clamping Ductile iron, bronze
Plate
Shangyu Group Co., Ltd. has been engaged in the valves and pipe fittings industry since 1970. We are leading the way of Chinese valve industry after over 40 years of development.
Our primary goal is to provide you with a safe, secure environment to industrial area.
Our scale:
Plant area - 58000m2
Total staff - 628
Engineering technicians - 12
Advanced equipments - 258
Annually production capacity -- 6000Tons
Main products:
Rubber lined valve series-NR, IIR, EPDM, CR, NBR, FKM, SI etc.
Fluorine lined valve series-PFA, PTFE, FEP, PCTFE, PVDF, PO etc.
Resilient seated gate valve series
Hydraulic supply and drainage valve series
Gate valve series
Globe valve series
Check valve series
Ball valve series
Butterfly valve series
Diaphragm valve series
Plug valve series
Special valve series
Plastic valve series
Pipe fittings
Nominal diameter: 3/8"~80" (DN10-2000)
Nominal pressure: CL150~CL2500 (PN1.0~32MPa)
Standards: API, ANSI, ISO, JIS, DIN, BS, GB standards or per request
Operation: Manual, Electric, Pneumatic, Hydraulic, Hydro-pneumatic & Computer controlled
Main certificates and honors:
ISO 9001
ISO 14001
OHSAS 18001
API 6D-0501
CE
TS
We hereby sincerely welcome customers at home and abroad to cooperate with us for a brilliant future.