Stainless Steel Single Disc Swing Wafer Check Valve
Product Description
Structure: Check
Pressure: Low to high pressure
Power: Hydraulic
Material: Casting
Temperature of Media: Normal Temperature
Media: Base
1) Sizes: 1/2''-40''
2) Class: 150-1, 500Lbs
3) Material: WCB, LCB, CF8 304, CF8M 316, CF3 304L, CF3M 316L, WC1, WC6, WC9, CN7M, Monel
4) Stardards:
A) Design and manufacture: API 6D, API594
B) Face to face: API 6D, API594, DIN 3202
C) End flange dimensions: ANSI B16.5, ANSI B16.47, API605, MSS SP-44, ISO7005-1, DIN2543-2548
D) Pressure-temperature ratings: ASME B 16.34
5) Inspection and test: API598, API 6D
Structure features:
1, It is short in face to face dimensions, being 1/4-1/8 times that of traditional flange type check valve.
2, It is impact in volume size and light in weight of about 1/4-1/20 times that of traditional flange type check valve.
3, The disc closes quickly with less water hammer pressure.
4, It is convenient in installation, being available for use on level or vertical pipeline.
5, Flow passage is fluent with flow resistance.
6, It acts sensitively with good sealing effect.
7, Disc travel is short with less impact force caused by valve closing.
8, It is impact in integral structure with nice outline view.
9, It is longer for service life with high reliability.
DESGN & MFT. | API 594 | ENDS CONNECTION | RF |
PRE-TEP. RATING | ASME B16.34 | INSPECT & TEST | API 598 |
F-F DIMENSION | ANSI B16.10 | END CONNECTION | ANSI B16.5 |
MARKING | MSS SP-25 | FIRE SAFE DESIGN | -- |
PAITING | TBA | SPE. REQUIREMENTS | N.A |
Since 1989, Vatac Vango Valves Manufacturer China has dedicated itself to the manufacture and service of a wide range of industrial valves and fittings for the services of Oil, Gas, Refinery, Chemical, Marine, Power Station and Pipeline Industries.
After over 3 decades of development and innovation, Vango Valves has been well approved by ISO 9001: 2000, API 6D & CE.
Our main Manufacturing and Supplying Capability Covering:
Through Conduit Gate Valve, Knife Gate Valve, Bellow Sealed Valve, Gate Valve, Check Valve, Globe Valve, Ball Valve, Butterfly Valve, Plug Valve, Cryogenic Valve, Diaphragm Valve, Needle Valve, Pinch Valve, Strainer, Steam Trap, Flanges and Pipe Fittings.
Materials ranges from conventional cast or forged steel to special alloy materials like Monel, Inconel, Hastelloy or Duplex steel. All of our products are designed, manufactured and tested fully to API, ASTM, ANSI, JIS, DIN and BS Standards.
Adhering to the tenet "Quality the world value", Vatac Vango Valve is stepping towards to the first class manufacturer and supplier of Industrial Valves and fittings in the world.