Xinshiji faucet ceramic mixer cartridge XSJ35-18A
35mm faucet ceramic mixer cartridge series
Description 1:
1. Model No.: XSJ35-18A
2. Max& Least temperature: 90 Degree&4 Degree
3. Max. Opening angle: 23°
4. Max turning angle: 100°
5. Ceramic disc hardness=1100HVS
6. Average flow rate(L/min) 26L/min at 3 bar
7. Air pressure test: 8bar (one by one tested by 100%)
8. Life test: ASME 112.18.1 500, 000cycles.
Application:
It's widely used for mixed faucet of kitchen and bathroom. This faucet ceramic mixer cartridge is very popular in the market of domestic as well as overseas.
Description 2:
1. Max. Opening angle 23° For water tap flow control.
2. Max turning angle 100° For water temperature adjustment.
3. High strength, excellent acid and alkali resistance.
4. Strict administration, times testing lead to much better quality.
5. Extremely long useful time, low overall operating costs
6. Quality authentication of ISO 9001
7. Color can be changed as your requirements
The quarter turn ceramic cartridge play a very important part in a good water taps.
As a manufacture specialized in faucet cartridges for over ten years
with full experiences and competitive production capacity, we're confident to offer you good quality under reasonable price.
Our products and company:
The design of cartridges is scientific and reasonable. Only qualified materal is selected and prepared. We have advanced production and processing equipment, inspection equipment and effective QC system. The production is arranged according to the National Standard GB11845-2003 strictly. Every cartridge must pass the air pressure test and open-close torque test.
This goods are well sold in both domestic and international markets. We gained good reputation and great trust from our customers. All the products can be done as the sample showing on the pictuers or based on clients' request.
Sample is free not including freight cost. Expect to your consultation
Welcome to visit our factory for further business relationship.
|
|
Cartridge component |
Material description |
|
Lever |
Brass |
|
Body |
POM/PC |
|
Adjust |
POM/PC |
|
Cover |
PC |
|
Upper ceramic disc |
95% |
|
Lower ceramic disc |
95% |
|
Gasket |
Silicon |
|
Base |
POM/PC |
|
Gasket |
Silicon |
|
Busing |
NBR |
|
Nest |
POM/PC |
Fenghua Xinshiji Ceramic Co., Ltd is a professional manufacturer of ceramic cartridge with ISO9001: 2000 certification. The quality of the products has been proved by National Quality Inspection center for Light industry&Architectural Hardware.
The design of cartridges is scientific and reasonable. Only qualified materal is selected and prepared. We have advanced production and processing equipment, inspection equipment and effective QC system. The production is arranged according to the National Standard GB11845-2003 strictly. Every cartridge must pass the air pressure test and open-close torque test.
This goods are well sold in both domestic and international markets. We gained good reputation and great trust from our customers. All the products can be done as the sample showing on the pictuers or based on clients' request.
The current 100 employees of the company enable the annual production capacity of 4 millions sets. The 3 series of our products including 25mm, 35mm, 40mm cartridges are well sold in both domestic and international market. Thus, we with high reputation and deep trust of our customers.
Following the tenet"Technology for creation. Quality for Existence and Reputation for Development", we sincerely welcome all friends and customers in the word to create a wonderful tomorrow! !
