Solenoid Valve -- Plastic Series 2/2 way Zero Pressure Differential -- Normally Closed
1.2-Way normally closed valve, closed when de-engergized, open when energized. Body material: Nylon (PA6)
2. Max Pressure: 10bar
3. Serialized products, small in size, large low rate, widely use
4. Flow as arrow, mounts in by position; Best position is solenoid vertical and upright direction
5. Voltage: 220VAC / 230VAC/ 110VAC/ 24VAC 50/60Hz 24VDC/ 12VDC etc. Voltage tolerance: +10% to -10%
6. Coil can fix Germany Nass Coil for orifice under DN16 ~ 25 only
7. This series valve are offered NBR or VITON or EPDM etc. For seals and diaphragm to provide on-off control of various fluids.
8. Plastic body: Its advantages are low cost, light, good apperance and easy to install. Consult factory for other size.
Yuyao Sanlixin Solenoid Valve Co., Ltd specializes in designing and manufacturing all kinds of fluid solenoid valves.
Our solenoid valve have direct acting type, pilot operated type, piston types
The body can be made of brass, stainless steel, plastic, Teflon and aluminum and the seals can be made of NBR, EPDM, viton, Teflon, PTFE silicon
The valve size can be DN1.00mm to DN150mm; Media can be water, hot water, gas, air, steam. Light oil, weak acid& alkali fluids etc.
So our solenoid valves are suitable for all the general purpose equipment.
Yuyao Sanlixin Solenoid Valve Co., Ltd. Specializes in designing and manufacturing all kinds of fluid solenoid valve, angle seat valve, electric valve and drafting of the national industrial fluid solenoid valve safety standards. Since 1993, our company has been developed greatly through the efforts from the staffs and great cooperation from the big distributors and related companies. A lot of sales chain stores and offices have been established at the main cities in the whole country basically, which can provide you with services of before-sale and after-sale. We have set up a sales and a services center in U. S. A., France, Poland, Russia, Vietnam, Australia, Indonesia for our Sanlixin products. Meanwhile, we have been authorized the general agency in China by GC VALVES from USA.
Our company has superior mechanical equipment, advanced processes, complete test methods, well business qualifications. Some specific and new products can be developed, made, consulted about the techniques by our company if you have some requests. In 2001, our company passed ISO9001: 2008 certification, and some of our products have passed TUV, CE approval.
We regard " science and technology for the first, quality for the basis, customer for the center and creating famous brand " as our management aim, and meet our customers' needs continuously, strive for mutual developments so that the industrial automation can be push forward further.